Marius Board Info
Collapsible content
Stick Module Info
3 Pin ( TMR ) - This is the most popular option. We use K-Silver JS13 TMRs by default but can use other TMRs by request.
TMR = Tunnel Magnetoresistance
These use a magnet and sensor to track your movements. Since the components do not rub they will not develop the unplayable stick drift. It is still common to slight movement if you're on a 0 deadzone. This is due to all raw reading sticks having a small centering tolereance ~3%.
Preferred for their fast response, longevity, and consistency
3 Pin ( ALPs ) - ALPs are the original sticks used by Sony/Microsoft in the controllers. They will have the most familiar feel but will eventually develop stick drift and need replaced.
Preferred for their familiar feel
5 Pin ( MH Gin or MH ALPs ) - 5 pin sticks are custom stick sensors developed Marius. They are a Hall Effect based design and offer an additional 2 pins for less electrical noise and a higher resolution. This means there are more data points across a curve of data resulting in smoother tracking. The 5 pin sensors are available in 2 versions.
MH Gin - 5 Pin sensors on a Ginfull stick base how Marius originally designed them. These perform very well but have slightly less tension ( ~25% less tension ).
Preferred for their fast and accurate movements
MH ALPs - 5 Pin sensors on an ALPs stick base. This is the same stick base that originally comes in the controller from the factory so it will have the same tension.
Preferred for the OEM tension and benefits of the 5 pin sensor.
5 pin stick modules are currently only available for PS4 controllers and by request only. PS5 and Xbox versions will come out later.
PS4 Marius ( MH4 ) Info
The Marius Board is a custom motherboard that replaces the OEM motherboard in the controller. It has no benefits besides pure speed.
Marius Boards are plug-in only and PC only.
How To Order
The Marius Board is the first option when building a PS4 controller on the website. We also offer a send in service. You can send us a controller to install the board into or send us a board to install if you have bought directly from Marius. There is a $30 install fee.
What's Included
Marius Board
Stick Modules of your choice
Added Button Remap Capabilities
What Is NOT Included
Rumbles - Speaker - Mic - Trackpad - Aux Port - Console Support - Gyro
Speed Expectation Breakdown for Most Setups
8000 Hz → ≈ 99 µs (0.099 ms)
4000 Hz → ≈ 162 µs (0.162 ms)
2000 Hz → ≈ 287 µs (0.287 ms)
1000 Hz → ≈ 537 µs (0.537 ms)
500 Hz → ≈ 1,037 µs (1.037 ms)
250 Hz → ≈ 2,037 µs (2.037 ms)
125 Hz → ≈ 4,037 µs (4.037 ms)
Comparisons ( Average ms )
Edge Overclock 8k - 2.25 ms
Edge - 3.65 ms
PS5 Overclock 8k - 2.15 ms
PS5 Overclock 1k - 3.5 ms
PS5 - 7.85 ms
PS4 Overclock 1k - 2.9 ms
PS4 - 10.35 ms
This means the Marius Board is natively
~ 38x faster than an overclocked PS4
~ 28x faster than an overclocked PS5 and Edge
Hz is adjustable via the slider on the set up website
Orders included with the Marius Board are non-returnable and non-refundable. These have years of R&D invested in them and are recommended for advanced gamers.
PS5 Marius ( MH5 ) Info ( Pre-Order )
Pre-Order Launch ( 4/15/2026 )
This is a pre-order, we do not have available stock yet. Expected first batch will be around the end of May 2026. Orders will be completed by order # when stock becomes available. Please refer to this page for inventory updates as we will not respond to DMs repeatedly asking.
If you ordered a PS5 Marius Conversion kit and do not receive it before the official release of the board, you will automatically be first in line when inventory comes in.
The Marius Board is a custom motherboard that replaces the OEM motherboard in the controller. It has no benefits besides pure speed.
Marius Boards are plug-in only and PC only.
How To Order
The Marius Board is the first option when building a PS5 controller on the website. We also offer a send in service. You can send us a controller to install the board into or send us a board to install if you have bought directly from Marius. There is a $30 install fee. There may be additional fees for Scuf controllers or other controllers that need work arounds.
What's Included
Marius Board
Stick Modules of your choice
Added Button Remap Capabilities
What Is NOT Included
Rumbles - Speaker - Mic - Trackpad - Aux Port - Console Support - Gyro
Speed Expectation Breakdown for Most Setups
8000 Hz → ≈ 99 µs (0.099 ms)
4000 Hz → ≈ 162 µs (0.162 ms)
2000 Hz → ≈ 287 µs (0.287 ms)
1000 Hz → ≈ 537 µs (0.537 ms)
500 Hz → ≈ 1,037 µs (1.037 ms)
250 Hz → ≈ 2,037 µs (2.037 ms)
125 Hz → ≈ 4,037 µs (4.037 ms)
Comparisons ( Average ms )
Edge Overclock 8k - 2.25 ms
Edge - 3.65 ms
PS5 Overclock 8k - 2.15 ms
PS5 Overclock 1k - 3.5 ms
PS5 - 7.85 ms
PS4 Overclock 1k - 2.9 ms
PS4 - 10.35 ms
This means the Marius Board is natively
~ 38x faster than an overclocked PS4
~ 28x faster than an overclocked PS5 and Edge
Hz is adjustable via the slider on the set up website
Orders included with the Marius Board are non-returnable and non-refundable. These have years of R&D invested in them and are recommended for advanced gamers.